Patmarlins Push Through Adaptor for LEE Sizing Dies

Available and shipping NOW..!

The push through adaptor holds all Lyman/H&I and RCBS top nose bullet punches in your press so you can bullet size and install gas checks with LEE sizing dies base first.

More photos and video coming SOON..!

The push through adaptor holds all Lyman/H&I and RCBS top nose bullet punches in your press so you can bullet size and install gas checks with LEE sizing dies base first.

There’s one size bored for your (Lyman)H&I or RCBS top nose punches.

It’s another way of bullet sizing and installing gas checks.

You place this in your reloading press. Screw in a LEE sizing die up top. Install an RCBS or H&I top nose punch that fits your bullet nose that you want to size, with the brass set screw in your press. Place the bullet on its nose with the gas check on then push the bullet (with your ram) up into the LEE sizing die base first.

This installs your gas check and sizes your bullet. Continue to feed your bullets. The last one you’ll need the LEE PIN or a wood dowel or something to push your last bullet through.